Concrete Lifting and Leveling Before & After Photos

The left half of this driveway was sinking into troubled soil, causing the concrete slabs to crack and break apart. We injected our PolyLevel foam under the left side of the driveway in order to even all the slabs out. Our PolyLevel foam is light, strong, clean, and cures quickly, allowing us to install it in less than a single day. After we leveled everything out, we then sealed the cracks and gaps to make sure water and debris stay out between the slabs. The result is a smooth driveway that eliminated all tripping hazards, and added a boost in home value.

The steps leading up to this backdoor in Liberty, KY, had settled into the soil. This process had caused the stairs to slope awkwardly away from the home. To level out the stairs again, we injected our PolyLevel foam underneath them. After leveling, we then sealed the gap between the sidewalk slab and the bottom step. Now when the homeowners walk out their backdoor, they can trust that the steps they are walking on are at an even level.

This home's front porch in Frankfort, Kentucky was due for a concrete lifting, especially near the steps. The PolyLevel foam was able to raise one side of the concrete back to restoration without cracking or damaging the slab. The slabs will be stable for a long, long time to come for the homeowner. 

This home's pretty side walk and drive way were becoming old and contained large gaps and cracks, something we aimed to fix. We were able to PolyLevel lift specific parts of the concrete to raise all the slabs to be on the same level. We then sealed the gaps with NexusPro sealant. These concrete slabs are repaired and protected now. 

We used Polylevel injections to raise this concrete sidewalk slab from the house to the garage. The concrete had sunk and caused a raised edge on the sidewalk, and could cause someone to trip. Now that the Polylevel injection has raised the slab up to be level with the rest, there is no longer a tripping hazard and the slab looks like new.